You added a product to the basket!
This is the JTAG kit that all pro-installers swear by. Known as "Kit #5" by those in the know as that was its code name during the NAND-X testing trials and it quickly gained a reputation as being the best kit available for all non-Xenon motherboards (Falcon, Zephyr, Opus, Jasper).
This kit is NOT included with the NAND-X Retail kit and is a seperate device for professional installers who wish to do the JTAG install on the alt points at the botom of the Non-Xenon motherboard. You do not need to own a NAND-X to use this produc
This PCB is soldered to the bottom of the motherboard and is for professional installers only. Do not attempt to install this if you do not have good soldering experience
BULK DISCOUNTS AVAILABLE !
This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.
Not good for me i'm afarid. Bought 2 spindles, the first one had a couple of coasters but the 2nd one must have had at least 12. I have a Samsung SH-223C SATA drive with the latest firmware and these failed on "Invalid Address For Write". Gone back to Verbs and no problems at al...