You added a product to the basket!
INSTALLERS - BUY MORE FOR MUCH LESS - SEE OUR BULK PRICES ABOVE.
Xecuter has designed a simple switch for all the Liteon drives that enables firmware full read/write. They have also included an On/OFF Led to show correct operation when switching to 0x72 vendor mode.
The installation is very simple and takes about 60 seconds if you have some small experience with a soldering iron. It has been tested with the original DOSFLASH methods and also the new Jungle Flasher 0.1.69. All Liteon drive versions have been tested with 100% Success. There is no need to remove the LT Switch after it has been installed - simply switch to normal mode.
This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.