You added a product to the basket!
Xecuter have released the latest in their line of LT Switch Liteon DVD mod products, the LT Clip + LT Switch v2.
This kit has been designed with the beginner in mind. It's been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. There is even included a built in continuity tester to make sure your trace cuts are perfect !
Also Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)
This is the first and only Liteon solution where there is 100% No Soldering & No Glue - The fastest and easiest "MRA Hack" product on the market.
This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.
Mine fried by having the ck3 switched on at same time pc was booted up from a cold boot. I was gutted but while looking for a fix i found links to ck3.co.uk, thank god is all i can say. I allways used xecuter chips back in the day as they rocked and was good quality so i had no quibles about bu...