Team Xecuter developed the first ever Xbox 360 connectivity kit back in 2006 and although it's success has been imitated it has never been bettered. We now present the first of the latest upcoming upgrades to the world famous CK3 product range.
This device is designed with the primary purpose to aid and/or assist in the repair or replacement of defective hardware. It does not contain any code or any kind of microchip that infringes any intellectual property.
The new CR3 PRO is aimed at users who demand the highest RGH performance possible and the ability to tune their settings to an extreme level.
The CR3 PRO is not for beginners, modders looking for cheap and cheerful solutions or anyone who is happy with slow, unreliable glitching. There are other devices out there that claim to be as good and with their own version of RATER but don't believe the hype. Without a 150Mhz RER crystal you are not going to get any where near the performance levels that the CR3 Pro gives you. This is the fastest and most configurable RGH device on the market.
This version of CR3 PRO is designed for slims that have had POST removed - so is developed with new code to support FAKE POST (Corona v3, Corona v4, Corona v5 & Corona v6). If you have a Trinity, Corona v1 or Corona v2 you will need the CR3 PRO FULL POST version.
Xecuter CR3 PRO v1.0S FAKE POST Features:
The CR3 Pro Ultimate Kit Includes:
FAKE POST Supported Motherboards (Click here for identification guide):
Note: To install to a Corona with POST removed one of the pins under the CPU needs to be accessed. This can be done with a degree of difficulty (see here), but Xecuter have designed a tool that can achieve this with ease - the POSTFIX ADAPTER V2 (now includes varied lengths for POST_OUT 5/50/70/90/120 CM - for even tighter fine tuning). This is included with the Ultimate Kit.
* DO NOT PROGRAM THE CR3 PRO IT IS PRE-PROGRAMMED! - THIS OPTION IS AVAILABLE ONLY IF AN UPDATED FIRMWARE IS EVER RELEASED.
Xecuter have provided their own range of Fiberglass Scratch Brush's with pen-shaped handles to clean up the green layer of varnish on PCB's so that the surface becomes very easy to solder to. They are used for removing rust or corrosion in hard-to-reach places.
Perfect for fitting Sputnik360 and LT Switches and also when doing any kind of trace repair. As recommend by Team Xecuter - see example usage here
Brush length is 4-1/2" - just one brush can last for a very long time as the length is adjustable.
An essential part of any serious modders toolkit.
A great 8x disc by Maxell ! These double layer discs have a branded gold top surface and have been tested to be highly compatible with DVD players and Video Game Consoles.
Maxell have always been known for the quality of their recordable blank media, and as part of the Hitachi Maxell group, have experience in a large number of areas. Maxell 8x Branded Dual Layer DVD+R DL is no exception.
Double-layer media has a capacity of 8.5GB, this equates to 240 minutes of video in standard play mode.
SEP (Super Extended Play): 960 min
SLP (Super Long Play): 720 min
EP (Extended Play): 480 min
LP (Long Play): 360 min
SP (Standard Play): 240 min
HQ (High Quality Play): 120 min
We always recommend that customers keep the firmware on their DVD writers up to date. This is especially true in the case of double layer media as a large number reported problems we receive are due to out of date firmware.
Bring your controller back to 100% performance with these brand new replacement analog thumbsticks with D-pad for your Xbox 360 controller. Color match your painted controller or just add them for extra bling.
Fits both wired and wireless Xbox 360 controllers. Even fits original Xbox controllers.
Note: Torx 8 Security and Phillips Screwdriver required for controller installation.
Fantastic value for money with this Xbox 360 Headset !
This is the JTAG QSB kit that all pro-installers swear by. Known as "Kit #5" by those in the know as that was its code name during the NAND-X testing trials and it quickly gained a reputation as being the best kit available for all non-Xenon motherboards (Falcon, Zephyr, Opus, Jasper). This is also the QSB that is used in R-JTAG installs.
This kit is NOT included with the NAND-X Retail kit and is a separate device for professional installers who wish to do the JTAG install on the alt points at the bottom of the Non-Xenon motherboard. You do not need to own a NAND-X to use this product.
This PCB is soldered to the bottom of the motherboard and is for professional installers only. Do not attempt to install this if you do not have good soldering experience.
Installation Guide: CLICK HERE
Other JTAG Instructions & Guides: CLICK HERE
This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.
The TX SPUTNIK360 Unlock Probe is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.
For multiple future uses of the probe we recommedn you installed the very cheap but super useful SPUTNIK360 PROBE PCB ADDON. You will never have to cut the trace again to r/w the drive - simply install the PCB and there is a switch for the trace open and close and a large pad for easy probing :)
Yet another simple and useful device from Team Xecuter.
Use your Xecuter CK3 Pro or CK3i to update your NAND-X firmware to the latest version NANDPRO so you can use your NAND-X to program your Xecuter CoolRunner (or any XC264A RGH device) over USB.
Note: The CK3 Pro requires a 1 wire modification (Not compatible with CK3 Lite)
A case opening kit for Xbox 360 Slim, using the best steel for molding, specially designed for unlocking the Xbox 360 Slim console.
This handy package contains everything you need to open up the Xbox 360 Slim without damaging the case.
As the Xbox 360 is sealed shut, it cannot be opened using conventional tools such as screwdrivers. These tools are useful should you wish to repair your 360, or fit it with a new case.
Also Includes Torx T8 & T10 screwdriver.
Video Tutorial: http://www.youtube.com/watch?v=oeEBWPBrS9U